Introduction
Overview
Features:
- PIN diode T/R switching for full QSK
- Built-in temperature sensing with automatic over-temperature shut-down
- Separate BNC antenna connector on K3 rear panel
- Field upgradeable with built-in diagnostic and troubleshooting commands
Specs
General
- Frequency Range: 144-148 MHz
- I.F. Range: 28-30 MHz
- Dimensions (HWD): 1x3.2x5 inches (2.5x8.1x12.7 cm)
- Supply Voltage: 13.8 VDC
- Typical Current Consumption: Transmit: 2A, Receive: 0.25A, Off: 0.01A
Transmit
- Power Output: 8 to10W Typical (13.8 V at the K3 in Transmit. Lower voltages willreduce the maximum power out)
- Spurious Output: < -60 dBc
Receive
- Noise Figure: 1 dB typical
- Gain: 20 dB typical
Reviews
FAQ
Q: How difficult is it to install the K144XV?
A: Only a few basic hand tools are needed to perform the installation. A minimal amount of soldering is required to install a power connector on the K3 RF board on some older K3 transceivers.
Q: When would I need to consider the RefLock option?
A: If you are planning on operating FM only, then you will not need to install the RefLock option. If, however, you plan to operate CW, Sideband or AM modes, install the RefLock option to maximize stability.
Manuals & Downloads
For all orders exceeding a value of 100USD shipping is offered for free.
Returns will be accepted for up to 10 days of Customer’s receipt or tracking number on unworn items. You, as a Customer, are obliged to inform us via email before you return the item.
Otherwise, standard shipping charges apply. Check out our delivery Terms & Conditions for more details.
