You do have to be careful when ordering one of these, while most any Qi charger works with this, the problem is the connection. The two main outlets on your phone are USB C, and USB micro. This is a type A USB micro. USB C is perfectly oval and can be used either way, but micro is a triangular trapezoid shape, and the narrow side can be up or down. Since the flat ribbon cable is coming from the back of the phone it must be able to be plugged into the port with the proper orientation as you cannot twist the ribbon cable. Look at your phone, two things are important, one is that orientation, and two the port must be in the center of the end, not off to the side. They may make cards that work on the side, but you'd have to find one. It won't likely work with a very thick case or some strap on lanyard that covers the back of the phone you need to be close to the Qi charger, and laid relatively flat.I just got a speaker phone with charger and after installing about 60 seconds to do, I put it on the charger and it immediately read phone was charging. Works well, as fast as the plug-in micro cable. In the past I'd used a flip phone for years and charge the battery outside. My current phone was used for testing mostly due to using WIFI apps. Ports to connectors are only designed for so many insertions. With phones I'd guess a couple hundred at best, but not certain. A lot of my friends had their port wear out, some cheap ones damage easier. This method allows you not to put any wear and tear on the port so you can save it for backup power when on camping or other remote locations. At home just put it on the charger platform at night and you're good to go all day (at least for more efficient phones). Recommended.